Need help?Do you have a question about the ResMed AirFit P10 and is the answer not in the manual?
General| Type | Nasal Pillow CPAP Mask |
|---|---|
| Weight | 1.6 oz (45 g) |
| Noise Level | 21 dBA |
| Cushion Material | Silicone |
| Sizes Available | Small, Medium, Large |
| Compatibility | Compatible with most CPAP machines |
| Intended Use | Treatment of Sleep Apnea |
| Headgear | Adjustable, Minimal Contact |
| Color | Gray |
| Ventilation | QuietAir Vent Technology |
Guide nasal pillows into nostrils, ensuring correct L/R placement.
Pull headgear over head, ensuring top strap sits comfortably.
Connect mask tubing to device tubing, check for vent airflow.
Spread split straps apart to loosen headgear for comfort.
Draw split straps closer to tighten headgear for a secure fit.
Squeeze and pull cushion away from the mask frame.
Remove headgear from stabilizers by releasing buttonholes from nodes.
Insert headgear ends through stabilizers and wrap around nodes.
Attach pillows to frame by inserting clips into correct slots.
Ensure nasal pillow inner walls are not compressed.
To Next Page
