Distributed by: see ResMed.com for ResMed locations worldwide. ActiveAir, AirFit, AirMini, HumidX, QuickFit and Swift are trademarks and/or registered trademarks of the ResMed
family of companies. For patient information, see ResMed.com/ip.See ResMed.com for other ResMed locations worldwide. © 2017 ResMed Ltd. Specifications may change without
notice. 10110062/1 2017-05
1
• Align your left (L) and right (R) pillows with
your left and right nostrils.
• To insert your waterless humidifier, simply
open your vent module with a twist.
Fitting guide for AirFit P10 for AirMini
Inserting HumidX or HumidX Plus
2
• Pull the headgear straps over your head.
Your lower headgear strap should sit
comfortably at the back of your head.
The top strap should sit comfortably
on your crown.
• Insert your choice of humidifier: HumidX
or HumidX Plus. It’s recommended to
begin therapy with HumidX and switch
to HumidX Plus if necessary.
5
• Your mask is now fitted and ready to use.
When the device is running, a light breeze
should be felt near the venting area around
the tube connection.
4
• To ensure a comfortable fit, briefly pull your mask away from your nose and reseat the pillows.
• Ensure the nasal pillows fit securely into your nostrils with both pillows positioned upright.
3
• To achieve a comfortable fit, adjust the
headgear straps. For a looser fit, spread the
upper and lower straps apart. To tighten,
draw them closer together.
• Reassemble your module with another
twist.
Note: For complete user instructions, refer to the AirFit P10 for AirMini User Guide.
A simple and easy design
AirFit P10 for AirMini
™
offers an expanded feature-set – combining the
pocket-sized portability and the new HumidX
™
waterless humidification
of ResMed’s AirMini Solution with the comfort and visual freedom of
the existing AirFit P10 mask design.
Available exclusively with AirMini, AirFit P10 for AirMini helps deliver
compact, travel-friendly therapy – for patients who want to enjoy the
benefits of therapy wherever they go.
ResMed.com/AirFitP10forAirMini
1
2 3
ResMed Ltd
1 Elizabeth Macarthur Drive
Bella Vista NSW 2153 Australia
To Next Page
Need help?
General
