Need help?Do you have a question about the ResMed Sullivan Comfort and is the answer not in the manual?
General| Category | Medical Equipment |
|---|---|
| Type | CPAP Machine |
| Manufacturer | ResMed |
| Model | Sullivan Comfort |
| Mode of Operation | Continuous Positive Airway Pressure (CPAP) |
| Pressure Range | 4-20 cm H2O |
| Power Supply | AC 100-240V, 50/60Hz |
| Noise Level | Approximately 30 dBA |
| Humidifier | Integrated or optional heated humidifier |
Guides on connecting the power cord to the flow generator and power outlet.
Explains how to power on the unit and initiate operation using the START button.
Provides instructions for connecting the air tubing to the device and mask.
Details on properly fitting the mask to the user's face for optimal seal.
Steps to connect, fit, and start the flow generator for daily use.
Explains how to use the START button to begin therapy and reach prescribed pressures.
Details on using the delay timer for gradual pressure build-up.
Covers common side effects and advises on when to consult a physician.
Stresses not stopping treatment without approval and informing medical staff.
Daily cleaning steps for the mask frame, cushion, and tubing.
Details on checking and replacing the air filter strips.
States that only authorized agents should perform unit inspection and repair.
Addresses issues with the flow generator failing to start and provides solutions.
Covers causes and solutions for insufficient air delivery from the unit.
Discusses causes and solutions for air leaks around the mask fit.
To Next Page