ReSound LINX 3D Fittings Guide

1
First Fitting with
ReSound Smart Fit
TM
This fitting guide gives an overview of how to fit ReSound LiNX 3D wireless hearing
instruments with ReSound Smart Fit. A ReSound LiNX 3D 961-DRW wireless binaural
fitting is depicted. Not all features described in this fitting guide are applicable for
ReSound LiNX 3D 7 and 5 fittings.
ReSound Smart Fit fitting software supports all ReSound LiNX 3D hearing instruments.
Prior to connecting to ReSound Smart Fit
ReSound hearing instruments require fresh batteries when fitting. Remove the stickers from the batteries
to activate. Wait for two minutes before using the batteries for best results.
• Wireless fittings: Insert a Noahlink Wireless in a USB slot on the fitting computer.
• Wired fittings: Ensure that the programming interface (Speedlink, Hi-PRO USB or NOAHlink)
is connected.
Launch ReSound Smart Fit. For new fittings, ReSound Smart Fit opens to the Smart Launcher.

ReSound LINX 3D Specifications

General

Model	LINX 3D
Wireless Connectivity	Yes
Bluetooth	Yes
App Compatibility	ReSound Smart 3D app
Directional Microphones	Yes
Noise Reduction	Yes
Feedback Cancellation	Yes
Fitting Range	Mild to severe hearing loss
Technology	Digital
Channels	17
Gain	Up to 70 dB
Battery Type	Rechargeable (selected models)
Style	Behind-the-Ear (BTE)
Frequency Range	100 Hz - 8 kHz
Battery Life	Varies by model and usage
Features	Spatial Sense
Type	Behind-the-Ear (BTE)
Water Resistance	IP68