ReSound LINX 3D Fittings Guide

2
3
Connection Flow
1. Select instrument configuration and click “Continue.”
3. Calibration of the hearing instruments is required in order to activate DFS Ultra II. Inform your
patient that he or she will hear a buzzing sound and should sit still and quiet during calibration.
Click “Calibrate” in the lower right corner. When calibration is complete, click “Continue.”
2. Select the appropriate physical properties for each hearing instrument and click “Continue.”
1
Smart Launcher
Both ReSound Aventa and ReSound Smart Fit are contained within one software installation. The
Smart Launcher will detect both ReSound LiNX 3D and legacy instruments, and then retrieve the
software appropriate for the connected device(s).
1. Insert the battery, wait two minutes and close the battery door of each hearing instrument to
be programmed.
2. Click “Connect” in the upper right of the Launcher screen.
Select Instruments
The hearing instruments will appear in the “Select Instruments” section.
1. Once the hearing instruments have been identified as right and left, click “Continue,” located at the
bottom right of the screen.
2
3
2
1

ReSound LINX 3D Specifications

General

Model	LINX 3D
Wireless Connectivity	Yes
Bluetooth	Yes
App Compatibility	ReSound Smart 3D app
Directional Microphones	Yes
Noise Reduction	Yes
Feedback Cancellation	Yes
Fitting Range	Mild to severe hearing loss
Technology	Digital
Channels	17
Gain	Up to 70 dB
Battery Type	Rechargeable (selected models)
Style	Behind-the-Ear (BTE)
Frequency Range	100 Hz - 8 kHz
Battery Life	Varies by model and usage
Features	Spatial Sense
Type	Behind-the-Ear (BTE)
Water Resistance	IP68