17
NOTICE
When using a vertical position the pocket must be worn so that the trigger faces downward!
• Remove buckle and adjuster from waist strap
>>> Velcro 6d on the waist strap must face upward
• Insert the waist strap through the horizontal or vertical strap
positioner (black fabric) on the back of the pocket until velcro 6d
connects to velcro 6c inside of the strap positioner.
>>> This prevents the pocket from moving around the waist strap
• Slide buckle and buckle back on
• The X-strap on the back of the pocket allows you to insert your own
straps, up to a width of 50mm.
>>> Insert the waist strap horizontally or vertically over the black
strap positioner and under the X-strap
Open the buckle and place the waist belt around the hips
>>> Wear the pocket so that the RESTUBE logo faces outward and
the strap positioner rests against the body
Close buckle safely
Fasten the buckle securely and adjust the waist strap to t tightly
>>> The loose end of the waist strap can be xed using the adjuster
Wear Restube on your right, so that the trigger is easily accessible
with your left hand
2.1 How do I fasten Restube correctly?
ENGLISH
STICK
NOTICE
The RESTUBE Positioning Bar (20), allows stabilization
of the bag when worn on the hip in the pocket provid-
ed inside the hip belt.
To Next Page
Loading...