Why is my Restube Active CO2 cartridge piercing immediately when screwing it in?
The CO2 cartridge might be piercing immediately because the release lever was not switched before screwing in the new CO2 cartridge. To avoid this, switch the release lever to the green position.
What to do if the Velcro on my Restube Active Safety Equipment doesn't close?
The Velcro might not close if the buoy is not folded correctly. Observe the packaging instructions to ensure it is folded properly. Alternatively, the buoy might not be positioned correctly in the pocket. Ensure the trigger mechanism faces the label with the appropriate symbol.
General| Brand | Restube |
|---|---|
| Model | Active |
| Category | Safety Equipment |
| Language | English |
Restube is not a life jacket, does not guarantee protection against drowning, and requires active user intervention.
Read product information carefully, check Restube before use, and contact dealer for defects. Never attempt self-repair.
Verify readiness for use by checking the trigger, cartridge, and buoy position before each use.
Instructions on how to wear the Restube correctly, ensuring the trigger is accessible and the product is secure.
The Positioning Bar stabilizes the bag when worn on the hip, enhancing comfort and fit.
Instructions on how to activate the Restube by pulling the trigger firmly to initiate inflation.
Guidance on using the inflated Restube, including positioning, staying calm, and using the whistle.
Steps to assist another person in distress, emphasizing safety and professional help notification.
Procedure for inflating the Restube using the oral valve, with warnings about avoiding over-inflation.
Steps to prepare the Restube for reuse, including CO2 cartridge replacement and proper folding.
Common problems like the buoy not fitting, Velcro issues, or CO2 cartridge problems and their solutions.
Guidelines for storing, caring for, maintaining, and disposing of the Restube product safely and effectively.
Recommended schedule for performing visual checks and maintenance on the Restube product.
Procedures for testing the trigger and oral valve to ensure proper functionality.
Information on checking float air-tightness and instructions for repacking the Restube.
Guidance on how to dispose of the Restube bag, belt, and CO2 cartridges correctly.
To Next Page