Packing List
Charge the receiver
FAQ
Name
Quantity
Call button keypad
Receiver
Power adaptor
User manual
1 pc
20 pcs
1 pc
1 pc
Problems Reasons
Solutions
While power on, the number
display on keypad is not on.
The power adaptor is broken. Change the power adaptor.
The distance of some receiver
gets near.
The power of battery is low. Charge the battery in time.
Receiver cannot get any signal
from keypad call button.
The pairing is deleted;
The number is not correct.
Pair the receiver again to
the keypad.
Forget the number of receiver.
Delete the pairing first, then
pair it again.
5
When the voltage of receiver is lower than DC3.2V, it is low power, LED1 and blue charging LED
indicator flicker with short buzzer sound, please recharge in time.
Plug the receiver to the charging slot, the blue charging LED indicator will flicker, while it is charged
full, the LED indicator will turn on all the time.
Warranty card
1 pc
To Next Page
Loading...
