4
Five mode cycle switching, when switching to the corresponding mode, the receiving card shall remind
the time 5 sec according to the corresponding reminder mode.
Take out the transparent plexiglass cover in the front of the pager, then put a Sticker inside the paper
slot, and then put back the cover.
Note: While doing the pairing operation, take out the cover and paper firstly.
Change Stickers
Packing List
FAQ
Name
Quantity
Call button keypad
pager
Power adaptor
User manual
1 pc
20 pcs
1 pc
1 pc
Problems Reasons
Solutions
While power on, the number
display on keypad is not on.
The power adaptor is broken. Change the power adaptor.
The distance of some pager
gets near.
The power of battery is low. Charge the battery in time.
Pager cannot get any signal
from keypad call button.
The pairing is deleted;
The number is not correct.
Pair the pager again to the
keypad.
Forget the number of pager.
Delete the pairing first, then
pair it again.
Warranty card
1 pc
To Next Page
Loading...
