1 2
Queue Wireless Calling System
User Manual
T116A
The diagram of transmitting host
Product introduction
Thanks for using our company's wireless calling system, it adopts
RF wireless technology . The system consists of 1 transmitting host
and 10 portable receivers, the receiver supports 998-channel exten-
sions, the transmitting host has 10 battery charging slots. Each rec-
eiver is rechargeable and labeled with a number, in standby status,
it is plugged into the charging slots, while the guest places an order,
he(she) will be dispatched one receiver with a number, when the or-
der is ready, the waiter will press the keypad to call the number, the
guest will get it through the buzzer/vibration/LED indications.
The queue system greatly improves the work efficiency and avoid
the guest waiting in a long queue. It is widely used in fast food rest-
aurant, church, dessert shop, auto 4S shop, food truck or other
queue occasions.
Receiver
Stickers
Charging slot
Keypad area
Power in
Antenna
Packing List
The diagram of the receiver
Transparent cover Stickers Front Side Back
SET
LED
Paper slot
Reset
Mode
Charging
pins
Built-in
battery
Name
Quantity
Transmitting host
Receiver
Power adaptor
User manual
1 pc
10 pcs
1 pc
1 pc
Stickers
10pcs
Transparent cover
Antenna
1 pc
10pcs
Technical data
Working voltage
Receive sensitivity
Battery capacity
Decoder
Dimmension
Working frequency
Standby current
Standby Time
Receiver
DC 3.7V (Rechargeable battery)
-110 dBm
300mAh
Learning code (AM)
106*52*11mm
433MHz
10mA
Power input
Working frequency
Transmit Power
Encoder
Dimmension
Transmitting host
DC 12V/1A
433MHz
360mW
Learning code (AM)
180*160*35mm
≈20 Hour
To Next Page
Need help?
General
