e.g, choose "0001", and press call key from call button.
After successful registration, the number will automatically
show “0002”. Then you can register the next call button.
Repeated registration of the same call button will appear
"DONE" on the display since only one number can be re-
gistered per call button.
5. Press Exit/Back button one time to return to Menu list,
press Exit/Back button again, back to standby mode.
The registration is finished.
·Delete Caller
1. Press Menu button for 2s to enter Menu list.
2. Press Down button to choose Delete Caller.
3. Press Menu to enter the sub-menu, "Delete Single" and
"Delete All" shows on the display.
4. Press Up/Down button to choose delete single or
delete all.
5. If choose "Delete Single", press Menu button to enter
sub-menu, it shows 0000 on the display.
6. Press Menu button to move the cursor position, and
press Up/Down buttons to choose the ID number to be
deleted.
7. Long press the Menu button for about 2s, it shows
Success on the display.
8. If choose "Delete All" press Menu button to enter sub-
menu, it shows “Yes” and “No” on the display.
9. Press Up/Down buttons to choose”Yes”, then short
press Menu button to confirm.
10. Press Exit/Back button 1 time to return to Menu list,
press Exit/Back button again, back to standby mode.
5
To Next Page
Loading...
