13.CSS VAGUE
ON: DTMF signaling invalid. The function only aect receive. OFF: Signaling valid.
a.Press the Menu key to enter the menu, press the UP or DOWN key to choose Channel Setting, and press the
Menu key to enter the next-level menu.
b.Press the UP or DOWN key to choose CSS Vague, and press the Menu key to enter the next-level menu.
c.Press the UP or DOWN key to choose ON or OFF.
d.Press the Menu key to conrm and save.
14.CANCEL ALL CT/DT
ON: Delete all CTCSS/DCS. It will switch to OFF afte r deletion. Check it in the menu is OFF. If users need
CTCSS/DCS, reset it again.
a.Press the Menu key to enter the menu, press the UP or DOWN key to choose Channel Setting, and press the
Menu key to enter the next-level menu.
b.Press the UP or DOWN key to choose Cancel All CT/DT, and press the Menu key to enter the next-level
menu.
c.Press the UP or DOWN key to choose ON or OFF.
d.Press the Menu key to conrm and save.
15.SHOW CH NAME
ON: Display the edited channel name.OFF: Don’t display the channel name.
a.Press the Menu key to enter the menu, press the UP or DOWN key to choose Channel Setting, and press the
Menu key to enter the next-level menu.
b.Press the UP or DOWN key to choose Show CH Name, and press the Menu key to enter the next-level
menu.
c.Press the UP or DOWN key to choose ON or OFF.
d.Press the Menu key to conrm and save.
16.CH NAME
The name can be edited: Chinese, with 0-9 numbers, and 26 letters input methods are optional. During
editing, press the # key to switch the input method, and the * key to delete.
a.Press the Menu key to enter the menu, press the UP or DOWN key to choose Channel Setting, and press the
Menu key to enter the next-level menu.
b.Press the keypad to input the needed channel name.
c.Press the Menu key to conrm and save.
17.CH SAVE
Channel save function: Choose the needed channel. If the channel behind displays Yes, the channel
information exists. The original channel will be covered if users still choose the current one. If display No, the
channel is the empty-frequency channel.
a.Press the Menu key to enter the menu, press the UP or DOWN key to choose Channel Setting, and press the
Menu key to enter the next-level menu.
b.Press the UP or DOWN key to choose CH Save, and press the Menu key to enter the next-level menu.
c.Press the UP or DOWN key to choose the saved CH001-CH256 channels.
d.Press the Menu key to conrm and save.
18.CH DELETE
Channel delete function: Delete the unnecessa channel. Delete the pointed channel information, if the
channel behind displays DEL, the channel has no information saved, and the operation is invalid.
a.Press the Menu key to enter the menu, press the UP or DOWN key to choose Channel Setting, and press the
Menu key to enter the next-level menu.
b.Press the UP or DOWN key to choose CH Delete, and press the Menu key to enter the next-level menu.
c.Press the UP or DOWN key to choose the deleted CH001-CH256 channels.
d.Press the Menu key to conrm and save.
19.VOX LEVEL
1-9 VOX level is optional. Level 1 is the smallest, and level 9 is the most sensitive. The radio is in noise
reduction mode and turns on VOX when recognizing the voice after turning on the VOX function.
a.Press the Menu key to enter the menu, press the UP or DOWN key to choose Channel Setting, and press the
Menu key to enter the next-level menu.
01 02 03 04 05 06
07 08 09 10 11
12 13 14 15 16
17 18 19 20 21 22 23 24
To Next Page
Loading...
