Need help?Do you have a question about the Retevis RT95 and is the answer not in the manual?
General| Channels | 200 |
|---|---|
| Frequency Stability | ±2.5ppm |
| Frequency Range | VHF:136-174MHz |
| Voltage | 13.8V DC ±15% |
| Channel Spacing | 25kHz/12.5kHz |
| Operating Temperature | -20°C to +60°C |
Instructions for mounting the transceiver in a vehicle safely.
Steps for connecting the DC power cable to the vehicle or power supply.
Guidance on connecting an efficient antenna for optimal performance.
Switching between VFO/Channel modes and editing channel data.
Deleting channels, setting CTCSS/DCS, and scanning.
Configuring microphone speaker output and dissimilar frequency setup.
Restoring the transceiver to its original factory settings.
Configuring CTCSS/DCS for selective signaling.
Configuring DTMF encode groups and codes.
Identifies common issues and provides potential solutions.
To Next Page
