Retevis RT95 User Manual

11
RT95 UHF/VHF Two Way Radio
According to practical application, you can set the radio works as Amateur Transceiver
mode or Professional Transceiver mode. There are also 2 levels operation menu to set
functions as you need. It is easy and convenient. FUNC MENU is for set background
function, CHAN MENU for set channel function, MINI KEY menu for set self dene key,
HAND KEY for set self mic dene key.
1.Working Mode:
A. By programming software: In PC software's "General Setting" menu, choose "Display
Mode" to select Amateur Transceiver mode or Professional Transceiver mode.
B. By manual setup: Please refer to "Display Mode" in Page 16.
2.Amateur Transceiver Mode:
Except setting as "CH" mode, others considered as Amateur transceiver
mode. Under this mode, press V/M matched PX key to switch between
Channel mode and VFO mode.
A. Frequency+Channel mode: When set display as "FRQ", it enters into
Frequency+Channel mode, new setting of channel operation and
shortcut operation can be temporarily used by user. Once the radio
is turned off or switched to anothe channel, the temporary setting will
be erased and back to initial settings.(As pic 1)
B. Channel+Name Tag Mode: When set display as "NM",it enters
into Channel +Name Tag mode. At this mode, it will display
corresponding channel name when the current channel is edited with
name. Otherwise, it will display frequency + channel. Its operations
are same as frequency + channel mode.(As pic 2)
C. VFO Mode(Frequency mode): This mode shows only frequency on
the display. Shortcut operation and Channel setting will be changed
& stored as the latest value permanently. Once the radio is turned off
or changed to new VFO frequency, the latest setting is remained until
next change.(As pic 3)
3. Professional Transceiver Mode:
When set display mode as "CH" , it enters into Professional Transceiver
mode. If there is corresponding name for current channel , the LCD
will display current channel name otherwise it shows current channel
number. (As Pic 4)
5. WORKING MODE
(AMATEUR TRANSCEIVER OR PROFESSIONAL TRANSCEIVER)
4.Under any mode, the FUNC MENU setting can be changed and saved.
»
If transceiver programmed as professional transceiver mode and locked, you can't
return to amateur transceiver mode by manual operation from general setting.
（pic1）
（pic2）
（pic3）
（pic4）

Retevis RT95 Specifications

General

Channels	200
Frequency Stability	±2.5ppm
Frequency Range	VHF:136-174MHz
Voltage	13.8V DC ±15%
Channel Spacing	25kHz/12.5kHz
Operating Temperature	-20°C to +60°C