Retevis RT95 User Manual

20
RT95 UHF/VHF Two Way Radio
1. Enter FUNCTION MENU list, choose No.16 function
2. Press [PUSH] button, the menu value in LCD turns to green color
3. Turn channel knob to choose wanted setting.
M&H: Turn on Main speaker and microphone speaker.
MAIN: Turn on Main speaker.
HAND: Turn on microphone speaker
4. Press [PUSH] button or [P3] key to store setting and exit
This radio has dissimilar frequency function, when this function is on the frequency in
upside of LCD is RX frequency, and the downside frequency is TX frequency. You can
revise the RX frequency by numberic key in microphone, you can revise TX frequency by
the A/B key in microphone or the PX key dened as A/B function.
1. Enter FUNCTION MENU list, choose No.17 function.
2. Press [PUSH] button, the menu value in LCD turns to green color.
3. Turn channel knob to choose wanted setting
ON: Turn on RTDF function.
OFF: Turn off RTDF function
4. Press [PUSH] button or [P3] key to store setting and exit.
If you radio seems to be malfunctioning because of wrong operation or setup, this function
will be able to resume all setup and channels to factory default.
1. Enter FUNCTION MENU list, choose No.18 function
2. Press [PUSH] button, the menu value in LCD turns to green color.
3. Turn channel knob to choose wanted setting
ALL: All channel, signaling function setup resume factory default.
OPT: All function menu setup resume factory default except CHAN MENU.
4. Press [PUSH] button or [P3] key to store setting and exit
7.16 Microphone Speaker
7.17 RTDF ( RX/TX dissimilar frequency Setup)
7.18 Reset Factory Default
»
Only can turn on RTDF function in VFO mode..

Retevis RT95 Specifications

General

Channels	200
Frequency Stability	±2.5ppm
Frequency Range	VHF:136-174MHz
Voltage	13.8V DC ±15%
Channel Spacing	25kHz/12.5kHz
Operating Temperature	-20°C to +60°C