Function Operations
Antenna
Display
Screen
PTT
Speaker
Function
Keys
Power Key
Belt Clip
PTT
MIC/Speaker
port
USB Charging
Port
Desktop Charger Connector
Charging the Battery Pack
1.The battery is not charged in the factory,please charge the battery
under the environmental temperature 5—40℃ before using.
2.After purchasing or long-term storage(more than two months),
charging the battery for the first time can not reach its saturation
capacity,repeat charge/discharge for twice or three times to make
battery capacity achieve the best state.
3.Before charging,please power off the transceiver,using the
transceiver during charging may affect correct charging.
4.If the battery has been charged fully,please do not charge it again,
otherwise the service life of the battery may be shorten or may be
damaged.
5.If the service time is significantly reduced even after completely
correct charging,the battery can not be used any more,please
replace a new battery.
4
To Next Page
Loading...
