Retevis RT23 - Page 27

Other Functions Operation Instruction
Start FM Radio
1.Press PF1/PF2 buttons to start FM radio
2.Input FM radio frequency by keypad directly
3.If local FM Radio frequency is unknown, then scan local FM Radio frequency to solve this problem.
Method: press PF1/PF2 buttons to start FM Radio press【 】key 2s to start FM Radio Scan, and scan
will stop when a FM Radio signal is detected,then press【 】to exit scan mode
4.FM Radio Storage
Method: Input the required FM radio frequency first Press【 】 key press【 】key 2s , when a
prompt sound is heard, Rotate channels knob to select the required storage channels press【 】key
2s, when a prompt sound is heard, that means storage successful press【 】key to exit.
→
→ →
→
→
Notice: PF1/PF2 buttons have been set as FM Radio hot key on software
#
Scan
#
Scan
M
E
N
U
Lock
V
F
O
C
all
M
R
V
F
O
C
all
M
R
VF
O
Ca
l
l
M R
M
E
N
U
Lock
0
T
ONE
M
EN
U
Lock
#
Scan
Emergency Alarm
Press【 】key Press【 】to start emergency alarm, transceiver speaker will beep alarm sound,
and also start remote alarm at the same time.
→
Notice:IF PF1/PF2 buttons have been set as alarm function, then press PF1.PF2 buttons to quick start emergency alarm.
Keypad lock start/close
To start/close keypad lock, press key 2s when in standby time.
Scan
Press【 】2s to start scan
Channel Storage
Under full frequency mode, input all the required frequencies by keypad, and also set CTCSS/DCS code,
【 】
24
STEP
5.00K
DS
01
NO.Menu Name
Enter Menu
Setting
Screen Display
Rotate Channel Knob to
select parameter(notes)
Confirm
Return
State
1010101010101010101010