Battery Full
Battery 2/3 charged
Battery 1/3 charged
Battery empty
When the battery power is low, the battery icon
will flash and there will be a beep indicating that
the batteries need to be replaced or recharged
.
3.7 Memory function
There is a memory function (including the on /
off status) when the machine is turned off or off,
and there is no need to reset the channel
3.8 Restore factory settings
In the shutdown state, press the key and the
button at the same time, all settings are
restored to factory settings.
.
3.9 How to communicate with each other
Mutual communication must be set to the same
channel and sub-audio, the need to press the
PTT call key,Please keep the mouth and
distance of about 5 cm, two-way radio
09
To Next Page
Loading...
