Retro-Bit SUPER RETRO-CADE User Manual (English)

Questions and Answers:

M
Marissa SmithJul 28, 2025
What to do if my Retro-Bit SUPER RETRO-CADE has no picture on the screen?
- I
  Ian CamposJul 28, 2025
  If your Retro-Bit Game Console displays no picture, ensure the TV is on and the HDMI® cable is correctly connected to both the TV and the console. If you're using an AV cable, check it's connected to the correct input on the TV. If both AV and HDMI® cables are connected, switch the TV input/channel from AV to HDMI®. Also, verify the console is powered on. As a last resort, disconnect and reconnect all cables from both the console and TV.
A
Amanda VincentAug 2, 2025
How to fix Retro-Bit Game Console not turning on?
- C
  christopher43Aug 2, 2025
  If your Retro-Bit Game Console is not turning on, check if the AC adapter is properly connected to both the console and a working power source. Make sure to press the Power button down until you hear or feel it click.
K
Kevin EstradaAug 7, 2025
Why is there no sound on my Retro-Bit SUPER RETRO-CADE Game Console?
- J
  Jon GarciaAug 7, 2025
  If you are not getting any sound from your Retro-Bit Game Console, first, check if the TV volume is too low or muted. Then, check the console's game volume to ensure it's turned up. Also, verify that the left and right audio cables are connected to the same input section as your video cable.
M
Mitchell RayAug 12, 2025
What to do if the Retro-Bit Game Console controller is not working?
- O
  owadeAug 12, 2025
  If the controller is not working with your Retro-Bit Game Console, first ensure it is properly connected to the console and plugged into the player 1 port. If it still doesn't work, with the controller connected to the player 1 port, turn the console off, wait 15 to 20 seconds, and then turn it back on.
K
Keith LewisAug 17, 2025
How to fix Retro-Bit Game Console when games do not load?
- J
  Joy ArmstrongAug 17, 2025
  If the games on your Retro-Bit Game Console are not loading, turn the console off, disconnect the AC adapter, wait 15 to 20 seconds, reconnect the AC adapter, and turn the console back on to load a game. If that doesn't work, go into the console settings, select Advanced, select Reset Default Settings, and select YES.
S
Sean CantuAug 22, 2025
What to do if my Retro-Bit Game Console can’t save to the SD card?
- T
  Troy HooperAug 22, 2025
  If you can’t save to the SD card on your Retro-Bit Game Console, verify that the SD card is not locked and that it is not full. If it is full, try using a different SD card.