REVER MCX1 User Manual

10644 03/15
REVER MCX1 MECHANICAL BRAKE INSTRUCTIONS
Thank you for choosing the Rever MCX1 brake system. To ensure the
best performance and reliability, please follow the instructions provided.
If you have any questions please contact an authorized dealer or Rever
representative. Enjoy and ride safely.
WARNING: CYCLING CAN BE DANGEROUS. BICYCLE PRODUCTS SHOULD BE
INSTALLED AND SERVICED BY A PROFESSIONAL MECHANIC. NEVER MODIFY YOUR
BICYCLE OR ACCESSORIES. READ AND FOLLOW ALL PRODUCT INSTRUCTIONS
AND WARNINGS INCLUDING INFORMATION ON THE MANUFACTURER’S WEBSITE.
INSPECT YOUR BICYCLE BEFORE EVERY RIDE. ALWAYS WEAR A HELMET.
Additional Product and Safety Information can be found at —ride-rever.com/safety
INTENDED USE
ASTM Condition 2: Smooth pavement to smooth gravel roads and
groomed trails with low-angle grades and drop offs of less than 6" (15cm).
COMPATIBILITY
Brake Levers: The MCX1 caliper is compatible with any short-pull, dropbar
lever designed for cyclocross and road riding.
Frame and Fork: The MCX1 caliper features a 74mm Post Mount. It will
work with most frames and forks and either 140mm or 160mm rotors, but
may require the use of an adapter.
INCLUDED HARDWARE
Qty Description
1 Caliper
1 Single-piece rotor, 6-bolt, 160mm
2 Disc brake pad
1 140/160mm I.S. adapter
1 160mm PM adapter
1 Kevlar
®
-reinforced
housing with EZ Bend
TOOLS NEEDED
• Cable and housing cutter
• Cable crimper
• Awl
• 3mm hex wrench
• 5mm hex wrench
• T25 Torx wrench
• Torque wrench
Usage Location Tool
Caliper fixing bolt 5mm hex wrench
Cable fixing bolt 5mm hex wrench
Pad adjustment screws
(inboard and outboard)
3mm hex wrench
Pad spring fixing bolt 3mm hex wrench
Rotor mounting bolts T25 Torx wrench
Fork Configuration Rotor Size Adapter Needed
140mm Post Mount 160mm
160mm Post/Post Adapter
(included)
160mm Post Mount 160mm None—direct fit
51mm I.S. Tab 160mm
160mm Rever Post/IS Adapter
(included)
Frame Configuration
140mm Post Mount 140mm None—direct fit
140mm Post Mount 160mm 160mm Post/Post Adapter
160mm Post Mount 160mm None—direct fit
51mm I.S. Tab 140mm
140mm Rever Post/IS Adapter
(included)
Qty Description
1 Ultra-slick stainless cable
1 Indexed inline brake adjuster
1 Hooded end cap
2 Lined end cap
2 Cable tip
4 Mini tube top
1 T-25 Torx wrench

REVER MCX1 Specifications

General

Brand	REVER
Model	MCX1
Category	Bicycle Accessories
Language	English

Summary

Intended Use and Compatibility

Intended Use

Specifies the intended riding conditions for the MCX1 brake system.

Brake Lever Compatibility

MCX1 caliper works with short-pull, dropbar levers for cyclocross/road.

Frame and Fork Compatibility

MCX1 caliper has 74mm Post Mount, works with most frames/forks, 140/160mm rotors, may need adapter.

Components and Tools

Included Hardware

List of all parts and hardware supplied with the MCX1 brake system.

Tools Needed

List of essential tools required for the installation process.

Installation: Rotor and Caliper

Install Rever Disc Brake Rotor

Steps for correctly mounting the disc brake rotor onto the wheel hub.

Install Rever Disc Brake Caliper

Instructions for attaching the brake caliper to the frame or fork.

Installation: Cable and Housing

Cable and Housing Setup

Detailed steps for routing and preparing the brake cable and housing.

Installation: Final Adjustments

Cable Tension and Anchor Bolt

Procedures for tightening the cable anchor bolt and adjusting tension.

Caliper and Piston Adjustment

Adjusting caliper mounting bolts and pistons for rotor centering.

Final Cable Cut and Tip

Cutting excess cable and installing a protective cable tip.

Brake Pad Bed-In and Maintenance

Disc Brake Pad and Rotor Bed-In Procedure

Procedure to heat-cycle pads and rotors for optimal braking performance.

Ongoing Maintenance

Guidelines for regular checks and upkeep of the brake system.

Disc Brake Pad Maintenance

Specific advice on cleaning and checking brake pads for wear.

General Maintenance

General safety checks and maintenance for wet weather and cleanliness.

Limited Warranty and Support

Limited Warranty

Information on the product's warranty coverage and limitations.