Reverso Outboard Flushing System 1.5 - User Manual

Reverso Outboard Flushing System 1.5

19 pages

Save Page as PDF

To Next Page

To Next Page

Loading...

Manual

Automatic Outboard Flushing System 1.5

Reverso Pumps, Inc. www.reversopumps.com | contact@reversopumps.com | Ph: (954) 522-0882

Shown: Version 1.5 B with optional remote switch kit and optional inlet hose kit.

Table of Contents

Questions and Answers

N
Natasha JohnsonJul 31, 2025
What to do if I have a loss of water pressure in my Reverso Outboard Flushing System 1.5?
- I
  idawsonJul 31, 2025
  If you experience a loss of water pressure with your Reverso Boating Equipment, the LED indicator will turn solid red, and the valves will close. Should the water pressure return within 5 minutes, the system will automatically resume operation from where it was interrupted. However, if the water pressure does not return within 5 minutes, the system will reset. To restart, simply press the start button to begin the cycles again, commencing with the first engine.

Summary

System Overview

Technical Specifications, Electrical, and Installation

Technical Specifications

Details voltage, amp draw, hose sizes, and dimensions for different engine setups.

Basic Features

Lists core functionalities like voltage support, engine setup options, and included components.

Optional Features

Describes available add-ons like remote switch and inlet hose kits with their specifications.

Primary Inspection and Mounting

Guides on initial inspection for damage and mounting considerations like holes and orientation.

Electrical Installation

Covers fuse/breaker requirements and wiring polarity for safe electrical connections.

Connection to Engines

Explains hose size recommendations and connection methods for engine flush ports.

Sealed Water Inlet

Details how to ensure a sealed water inlet to prevent backflow using caps or kits.

Inlet Hose Kit

Inlet Hose Kit Installation

Provides guidance on installing the inlet hose kit, emphasizing proper handling of the valve collar.

Remote Switch Kit

Remote Switch Kit Version A

Details the Delphi connector and connection procedure for Version A.

Remote Switch Kit Version B

Explains the Deutsch connector and connection procedure for Version B.

Installation Diagram: 2 Engine Setup

Installation Diagram: 3 Engine Setup

Installation Diagram: 4 Engine Setup

Installation Diagram: 5 Engine Setup

Version A Dimensions: 2 Engine Setup

Version A Dimensions: 3 Engine Setup

Version A Dimensions: 4 Engine Setup

Version B Dimensions: 2 Engine Setup

Version B Dimensions: 3 Engine Setup

Version B Dimensions: 4 Engine Setup

Version B Dimensions: 5 Engine Setup

Operation and Troubleshooting

System Operation

Details the steps for activating the flushing cycle, including button presses and LED indicators.

Loss of Water Pressure Handling

Explains the system's behavior and recovery process when water pressure is lost.

Troubleshooting Guide

Provides key checks for ensuring proper function, connections, and voltage.

Reverso Outboard Flushing System 1.5 Specifications

General

Brand	Reverso
Model	Outboard Flushing System 1.5
Category	Boating Equipment
Language	English