When changing the gain or entering any menu in the front control panel that
allows the user to changing values, a password prompt will appear before the
user is allowed to proceed. To enter the password, use the right and left arrow
keys to select a digit, and the up button to change the number of that digit (0-
9). Hitting Enter will submit the password, and down brings the cursor to the
cancel button. On the front panel, the password will be valid for 20 minutes,
unless the user explicitly logs out in the Admin Settings submenu as described
further below. The factory preset password is 7386, and can be changed either
through the Admin Settings menu on the front panel interface, or the System
Configuration menu on the local Web UI.
To Next Page
Loading...
