Need help?Do you have a question about the Revox B760 and is the answer not in the manual?
Explains the local oscillator, phase-locked loop, and frequency synthesizer.
Lists the required test equipment for proper alignment procedures.
Procedure for checking and adjusting supply voltages before alignment.
Step-by-step guide for aligning the local oscillator and synthesizer.
Instructions for aligning the RF circuits, including bandpass filters.
Procedure for aligning IF filters, IF amplifier, and tuning discriminator.
Detailed steps for aligning the stereo decoder.
Guide for calibrating the signal strength meter.
Procedure for adjusting the audio output voltage levels.
Details how to measure the tuner's input sensitivity.
Instructions for measuring audio distortion levels.
Procedure for measuring the signal-to-noise ratio.
Method for measuring stereo separation or crosstalk.
To Next Page
General
