Revox Classic Line B25 User Manual

REVOX’
NEW: None ofthe existing stations will be overwritten
but rather a new one is added.
INSERT: A new station containing the new values is
inserted in place of the previously selected station;
the existing higher stations are shifted to the right by
one position.
QUIT: Terminate the program without storing the
changes. |
¢ Confirm the selection of this function by pressing the
MENU « DISPLAY [14] key.
The tuner now operates again in normal mode.
AUTOMEM
¢ Activate the PROGRAM mode.
e With the <, > keys [16] switch over the display until
the «AUTOMEM>» function is displayed.
Initiate the function with the MENU « DISPLAY [14]
key.
The automatic search and store operation is started
and terminated when either the upper limit of the
frequency band is reached or 35 stations have been
found.
Display: The station number flashes and is
incremented by one each time a station has been
found. The scanned frequency is also continually
displayed.
End of the scan: The last found station is active, the
station number no longer flashes.
The tuner then returns to normal operating mode.
B 26 FM-Tuner PROGRAM Mode
Enter PROGRAM MODE: Frequency scan,
Press MENU « DISPLAY key 87.50...108.00 MHz:
for 1 sec <,> keys
keys . MENU
<,> DISPLAY |
MENU MANUAL
102.55 bs
AUTOMEM
Wait until AUTOMEM
operation has been
completed
DELETE
a ee rh B
QUIT
B 25, B 22, B 26
Signal
strength
indicator
MENU
DISPLAY
E10
For RDS stations with identical identifiers, the
AUTOMEMORY function stores only the station with the
best reception quality. The stations are sorted in ascend-
ing order by station identifier, the remaining memory
locations are assigned to non-RDS stations.
Reactivating the factory setting
Interrupt the AUTOMEMORY functions and reactivate
the factory setting:
¢ During the search, turn the tuner off by pressing the
POWER [13] key and then switch it on again. The 35
station memories are overwritten with the default
frequencies defined by the factory. Any previously
stored values will be lost.
DELETE
¢ Before the PROGRAM mode has been activated:
¢ Select the station to be deleted by pressing the < , >
_ keys [16]. »
¢ Activate the PROGRAM mode.
¢ With the <, > keys [16] toggle through the functions
until «DELETE» is displayed.
¢ Initiate the function by pressing the MENU « DIS-
PLAY [14] key.
The display shows: «WAIT !» followed by «— OK —».
The station is deleted and all higher stations are
shifted downward by one position to fill the gap.
QUIT
¢ Terminate the PROGRAM mode without storing the
changes.
« Confirm the selection of this function by pressing the
MENU « DISPLAY [14] key.
The tuner now operates again in normal mode.
The tuner returnsto
normal operation mode
MENU
DISPLAY
STEREO
MENU
DISPLAY
STORE DRS3
BLEND NE
INSERT
A A
QUIT

Revox Classic Line B25 Specifications

General

Brand	Revox
Model	Classic Line B25
Category	Stereo System
Language	English