Operating your F10 Dashboard Camera
Settings
26
©2017 REXING All Rights Reserved.
Turning the Device On and Off
Press and hold the Power/OK button for a few seconds to turn on the device. A
welcome message will be displayed onscreen as shown in the image below.
To turn off the device, again press and hold the Power/OK button for a few
seconds. A goodbye message will be displayed onscreen.
Note: The F10 Dashboard Camera will switch on and off automatically if you
keep it permanently connected to the car charger. If the car charging port
provides a continuous flow of power, the camera will stay powered on at
all times.
To Next Page
Loading...
