15
6. Troubleshooting
6.1 Can’t switch on camera
a. Please check if the batteries polarity is correct or check battery power level in
daylight without enabling IR light.
b. Reload the batteries and reboot the camera without inserting a SD card.
c. If the above step can’t work, please format or replace your SD card and try again.
6.2 Picture color abnormal
Turn off the camera and reload the batteries, and try to reboot the camera.
6.3 Camera can’t take picture.
Please check if the SD card is NON-WRITABLE.
6.4 PIR not work
a. Must install SD card.
b. Please check if the space of the SD card is full.
c. Please check if the camera in time lapse or delay mode.
To Next Page
Loading...
