a. Insert the SD memory card correctly, camera support SD card hot swap (insertion).
b. Please use AA battery with good quality in order to prevent batteries from
corrosion of leaked acid.
c. Use right adaptor (6V/2A) of this camera to supply power, and do not invert the
electrode when put in batteries.
d. Do not interrupt power supply during system upgrade, please reach out to our
customer support team if the device does not work after upgrading.
e. Do not keep camera next to hot irrelevant objects, air conditioner exhaust vents,
and light, etc. to avoid mistaking photos or videos.
b. Power Adaptor - Security Surveillance Purpose
This camera can also be powered by an external 6V/2A DC adapter.
Recommend to remove the alkaline batteries when power adapter is used to
avoid surcharging.
Electrical power is recommended for security purposes.
• Do not mix old and new batteries.
• Do not mix battery types - use ALL lithium or ALL alkaline.
• Rechargeable batteries are not recommended.
Warning
!
1.3 Attention
4
To Next Page
Loading...
