Inserting Storage Media
Basic Operation
8
Please prepare a Micro SD card and insert it into the camera for saving more files.
Before recording, please format the memory card first.
Turn On/Off the Camera
After the battery is plugged in, long press the power button to start the device.
Long press the power button again to turn it off.
• Support Micro SD card, up to 512GB. Suggest to use at least class 10 or above
high speed card.
• To avoid malfunction, the memory card should be far away water, strong vibration,
dust, hot source and direct sunlight.
• Do not insert the memory card forcibly. Please refer to the marking on the camera.
• For the first time use, please wait for the memory card temperature reach the
ambient temperature. The camera will be short-circuit influenced by environment
temperature and humidity. Please notice the protection for the camera when using
it outdoor.
• If the capacity of the memory card is full, the TL1 will stop recording automatically
and the LEDs will go out.
• Press the edge of the card gently to pop-up the Micro SD card.
To Next Page
Loading...
