Rexing TL1 - Set Manual Time-Lapse Shooting; Using the Screw Mount

14
Using the Screw Mount
You can mount the TL1 permanently on a wall or tree using the supplied screw
mount. Before mounting the screw mount you should ensure that all existing
screws are tight.
Set Manual Time-Lapse Shooting
a. After starting up, press the MODE button to switch to the photo mode, press the
Up/MTL button to enter the manual photo time-lapse photo, press OK button to
shoot and then press Up/MTL button again to stop the manual time-lapse photo.
b. After starting up, press the mode button to switch to the video mode, press the
Up/MTL button to enter the manual time-lapse video, press OK button to start and
then press Up/MTL button again to stop the manual time-lapse video.
2M 08447
SD
Timelapse (Manual) REC