3
UNPACKING
Carefully unpack the drill press and all its parts, and compare against the list and the
illustration below. Place the drill press on a secure surface and examine it carefully.
CARTON CONTENTS
WARNING!
• To avoid injury from unexpected starting or electrical shock, do not plug the power
cord into a source of power during unpacking and assembly. This cord must remain
unplugged whenever you are adjustig/assembling the drill press.
• The drill press is heavy and should be lifted with care. If needed, get the assistance of
someone to lift and move the drill press.
• If any part is missing or damaged, do not attempt to assemble the drill press, or plug in
the power cord until the missing or damaged part is correctly replaced.
Head Assembly
Table
Base
Hardware Bag
Column Assembly
Feed Handle Assembly
Chuck & Key Hardware
To Next Page
Loading...
