Need help?Do you have a question about the REXON DP3800RF and is the answer not in the manual?
General| Brand | REXON |
|---|---|
| Model | DP3800RF |
| Category | Power Tool |
| Language | English |
Procedure for unpacking the drill press and its components.
Specific safety precautions for operating the drill press.
Guidelines for environmentally responsible disposal of materials.
Identification of main parts of the drill press.
Step-by-step instructions for attaching the column to the base.
Procedure for mounting the table onto the drill press.
Steps for attaching the drill press head to the column.
How to attach the feed handles to the drill press.
Mounting the drill chuck and arbor onto the spindle.
Guidance on storing the chuck key and installing the work light bulb.
Information on initial adjustments and potential future readjustments.
Instructions for setting up the drill press for angled drilling.
How to eliminate play in the spindle and quill assembly.
Adjusting the tension of the quill return spring.
Procedure for setting the correct belt tension.
Aligning the laser guide vertically for accurate marking.
Calibrating the laser for crosshair alignment on the workpiece.
Explanation of symbols and warnings on the laser label.
Fundamental steps for operating the drill press safely.
Details about the power switch, safety key, and laser switch.
Step-by-step guide for inserting and securing a drill bit.
Methods for drilling blind holes to a precise depth.
Securing the spindle at a specific depth setting.
Procedure for safely detaching the chuck and arbor.
Review of essential operating guidelines for user safety.
Proper placement of the table and workpiece for safe drilling.
Instructions on how to adjust the table angle.
Routine cleaning and care for the drill press.
Information regarding lubrication needs of the drill press.
To Next Page
