Need help?Do you have a question about the REXON SM2509R and is the answer not in the manual?
Verify all components are present after removing the saw from its packaging.
Maintain a clear area, avoid wet conditions, protect against electric shock, and wear PPE.
Use correct tools, secure work, avoid overreaching, and disconnect power for servicing.
Use recommended blades, ensure guards are in place, and handle workpieces safely.
Ensure proper operator training, adequate lighting, and correct PPE.
Familiarize yourself with the parts of the miter saw using the provided diagram.
Learn the meaning of various symbols used in the manual and on the tool.
View the motor, blade, and capacity details of the miter saw.
Learn how to safely transport the saw and lock its cutting head.
Steps for attaching the miter handle and dust collection bag.
Store the blade wrench and install the hold-down clamp for secure work.
Manage slide carriage, table insert, and power cord for operation and storage.
Adjust bevel stops and pointer for accurate 0°, 45°, and 33.9° bevel angles.
Understand and utilize the miter scale and positive stops for precise angle settings.
Adjust miter angles, pointer, and fence squareness for accurate cuts.
Preset cutting depth and adjust the quick-cam locking lever for stability.
Adjust table support and operate the laser guide for precise cutting alignment.
Calibrate the laser line to match the saw blade path for accurate cuts.
Utilize extension wings for long workpieces and the stop plate for repetitive cuts.
Connect power safely, use extension leads correctly, and mount the saw securely.
Learn fundamental operations and safe hand placement during cuts.
Operate the saw using the trigger switch and understand safety features like the electric brake.
Extend, lock, remove, or install the sliding fence for different cuts.
Understand the sliding carriage system and quick-cam locking for angle adjustments.
Use the detent override for fine adjustments and perform standard miter cuts.
Follow safety procedures before leaving the saw and prepare for cutting operations.
Perform bevel cuts and set up for 33.9° crown molding cuts.
Execute compound cuts and base molding cuts using specific table settings.
Follow guidance for cutting crown molding flat on the saw table.
Perform slide cuts safely and effectively, ensuring proper workpiece handling.
Detailed steps for safely removing and installing saw blades, including safety warnings.
Perform routine cleaning and lubrication of the miter saw.
Check motor brushes for wear and replace them as needed for optimal performance.
To Next Page
General
