Point-to-Point/SIK Firmware User Manual
1 Introduction
The RFD900x/ux/ux-SMT and RFD868x/ux/ux-SMT can be loaded with three official firmware
releases to achieve different communication architectures and node topologies.
Available firmware types are:
Point-to-Point/SiK
Asynchronous mesh
Multipoint network
This document describes the configuration of the Point-to-Point/SiK V3.x and up. Modems sold after
April 2019 come with a 3.xx version loaded by default. The firmware has a set of default settings that
allow it to work out of the box in most cases. The firmware will not necessarily be compatible
between versions so it is recommended to update all modems to the same version.
To Next Page
Loading...
