Kempton Platform - Page
3 of 3
10/1/18
On inside surface of both side rails are cavities designed to hold the individual bed
slats. Set individual bed slats on both sides of the side rails as shown in FIGURE 6
Place the Platform Panels (G) on the bed slats, then fix them with screws(8)
provided. See FIGURE 7
Assembly is complete.
7.
8.
9.
CARE INSTRUCTIONS
IMPORTANT SAFETY INSTRUCTIONS
1. Dust often using a clean, sofy, dry and lint-free cloth.
2. Blot spills immediately and wipe with a clean, damp cloth.
3. We do not recommend the use of chemical cleansers, abrasives, or furniture polish on our lacquered finish.
1. Please read all instructions carefully before assembling.
2. For your safety, assembly by two or more adulst is strongly recommended.
3. Keep these instructions for future use.
4. Use only vendor supplied hardware to assemble. Using unauthorized hardware could jeopardize the structural integrity
of the item
KEMPTON UPHOLSTERED PLATFORM KING AND CAL KING BED INSTRUCTIONS
To Previous Page
Loading...
