RH Orizaba 10189691 - Assembly and Filler Material; Filler Material Safety Guidelines

8
DO NOT BLOCK
+
-
ASSEMBLY INSTRUCTIONS
1. Install the AA battery as shown in the diagram.
2. Place the filler material into the burner pan by hand. To avoid clogging the burner with dust,
do not dump the bag into the burner pan. Position the filler across the burner pan to a level
that is 1 inch (2.54 cm) above the burner tube. Make sure you do not block the igniter
housing with the filler material to ensure proper ignition and operation.
FILLER MATERIAL WARNING
• Do not overfill the burner area with rock; use only the specified amount. The depth of the
filler should not be more than 1 inch (2.54 cm) above the burner tube. Only the included
filler products have been certified and tested for safe use with this fireplace. Using other
filler material may result in increased popping and cracking or increased carbon monoxide
emissions.
• Do not light or use this fireplace if the filler is wet. Ensure filler is completely dry before
lighting. Intense heat can cause wet filler to explode and hit someone causing property
damage, serious injury or death.
• Keep away from the fireplace for at least 20 minutes during initial start-up as filler could
retain moisture from manufacturing and shipping.
Orizaba Liquid Propane Fire Tables