Rheem 10EBRGR User Manual

92-24161-38-03
SUPERSEDES 92-24161-38-02
INSTALLATION INSTRUCTIONS
FOR UPFLOW/HORIZONTAL & DOWNFLOW INDUCED
DRAFT GAS FURNACES
(-)GPN/(-)GPP UPFLOW/HORIZONTAL SERIES
(-)GLN DOWNFLOW SERIES

Rheem 10EBRGR Specifications

General

Brand	Rheem
Model	10EBRGR
Category	Furnace
Language	English

Summary

Installation and Setup

Installation Checklist

A checklist for verifying proper furnace installation across various components.

Location and Clearance Requirements

Guidelines for selecting sites and required clearances for safe installation.

Ducting and Airflow Requirements

Outlines proper airflow, duct sizing, and static pressure considerations for optimal performance.

Combustion and Ventilation Air

Critical information on providing adequate air for combustion and ventilation, and warnings about corrosive atmospheres.

Venting and Gas Systems

Venting General Information

General instructions and warnings regarding furnace venting systems and draft inducer operation.

Vertical Venting Installation

Specific guidelines for Type B-1 vertical vent installation and termination.

Gas Supply and Piping

Details on connecting the gas supply, piping, safety, and conversion to LP gas.

Gas Pressure Settings

Information on setting, measuring, and adjusting gas pressures for furnace operation.

Electrical, Controls, and Options

Electrical Wiring Safety

Essential safety warnings and procedures for electrical connections and grounding.

Thermostat and Controls

Guidelines for thermostat compatibility, placement, and heat anticipator settings.

Optional Accessories and Twinning

Information on optional accessories and requirements for installing multiple furnaces.

Operation, Maintenance, and Troubleshooting

High Altitude Operation

Instructions for de-rating furnaces and selecting orifices for high altitudes.

Start-Up Procedure

Step-by-step guide for safely starting up the furnace.

Blower Speed and Safety Features

Procedures for adjusting blower speed and overview of safety features like limit controls.

Maintenance and System Operation

Routine maintenance, filter care, and customer advice for efficient system operation.

Troubleshooting and Diagrams

Guidance on diagnosing problems using flowcharts and wiring diagrams.