Do you have a question about the Rheem RGRK-12ERAJS Series and is the answer not in the manual?
Checklist items for gas supply setup and verification.
Checklist items for electrical connections and grounding.
Checklist items for furnace placement and clearances.
Checklist items for ductwork static pressure checks.
Checklist items for condensate drain system setup.
Checklist items for direct vent pipe installation.
Checklist items for direct vent terminal placement.
Checklist items for alternate horizontal vent terminations.
Checklist items for non-direct vent pipe installation.
Checklist items for non-direct vent terminal placement.
Guidelines for choosing an appropriate installation site for the furnace.
Specifies required clearances from combustible materials and for service access.
Specific ducting considerations for upflow furnace installations.
Specific ducting considerations for downflow furnace installations.
Specific ducting considerations for horizontal furnace installations.
Instructions for properly joining PVC and ABS vent pipes and fittings.
Step-by-step guide for cementing vent pipe joints using solvent and primer.
Guidance on providing combustion air for furnaces in unconfined areas.
Guidance on providing combustion air for furnaces in confined areas.
General guidelines for standard non-direct vent installations.
Specifies proper termination locations for non-direct vents.
Instructions for direct vent combustion air system design.
Guidelines for standard direct vent termination configurations.
Options for alternate horizontal direct vent terminations.
Installation of concentric vent kits for vertical or horizontal runs.
Details on condensate drain setup for upflow furnace configurations.
Instructions for repositioning the condensate trap for different drain orientations.
Steps to convert the condensate drain for horizontal furnace installation.
Instructions and warnings regarding the furnace's gas supply.
Guidelines for installing gas piping according to codes and standards.
Information on natural and LP gas supply pressures.
Procedures for converting the furnace for LP gas use.
Location and adjustment of manifold pressure taps.
Details on the furnace's gas control valve operation.
Diagrams and instructions for connecting various thermostat types.
Wiring instructions for optional accessories like air cleaners and humidifiers.
Step-by-step guide for furnace operation with a two-stage thermostat.
Information on cleaning, replacing, and sizing furnace filters.
Details on filter application, placement, and importance for system performance.