Rheem RGRT SERIES - User Manual

Rheem Value Series
Upflow Gas Furnace
FORM NO. G11-534
RGRS/RGRT- Series
Up to 93.5% A.F.U.E.†
Input Rates 45-120 kBTU
✝A.F.U.E. (Annual Fuel Utilization Efficiency) calculated in accordance with
Department of Energy test procedures.
• The Rheem Value Series High Efficiency line of upflow gas
furnaces are designed for utility rooms, closets, or alcoves.
Because of the low-profile 34 inch height, this model can be
used vertically to satisfy most applications that traditionally
call for a horizontal furnace.
• The design is certified by CSA.
• Low profile “34 inch” design is lighter and easier to handle
and leaves room for optional accessories.
• Left or right side gas, electric, and condensate drainage
connections on upflow models.
• Integrated control board manages all operational functions
and provides accessory hookups for an electronic air cleaner.
• A slow-opening gas valve and a specially designed inducer
system make it one of the quietest furnaces on the market
today.
• Pre-paint galvanized steel cabinet.
• Optional indoor or outdoor combustion air. In addition,
combustion air may be piped to either the top or right side
of the cabinet on all upflow models. A special molded fitting
is provided to ease installation.
• Control board diagnostics.
• A variety of cooling coils and plenums designed to use with
the Rheem Value Series gas furnaces are available as optional
accessories for air conditioning models.
Air
Gas Furnaces
RGRS/RGRT Series
Annual Fuel Utilization Efficiency - AFUE
THIS MODEL
ENER UIDE
97%78%
HIGH
MID
82% 88%
92.0%

Rheem RGRT SERIES Specifications

General

Brand	Rheem
Model	RGRT SERIES
Category	Furnace
Language	English

Summary

Standard and Optional Equipment

Standard Equipment Components

Lists key components included in the standard package, such as heat exchangers, controls, and blower motor.

Optional Equipment & Gas Conversion

Highlights optional features like conversion kits for L.P. gas and notes about mobile home use suitability.

Model Features and Physical Data

Rheem Value Series Model Features

Details design certifications, low-profile design, connection options, and quiet operation for the upflow gas furnace.

Upflow Model Physical Specifications

Provides technical specifications like input/output rates, blower size, motor HP, and AFUE for various models.

Model Number Identification

Decoding Rheem Furnace Model Numbers

Explains the meaning of each character in the RGRS/RGRT series model numbering system.

Dimensional Data and Clearances

Upflow Furnace Dimensions and Diagrams

Shows diagrams with detailed measurements and clearances for upflow models.

Minimum Installation Clearances

Lists specific dimensions (A-F) and minimum clearances required for installation.

Blower Performance Specifications

Air Delivery Performance Data

Provides detailed airflow (CFM) data for various blower speeds and external static pressures.

Furnace Accessories

Venting and Air Intake Accessories

Lists kits for venting, combustion air, and neutralizers for upflow installations.

Filter Racks and Plenum Adapters

Details filter rack sizes and plenum adapters for specific coil and furnace combinations.

High Altitude Conversion Kits

Describes kits and options for converting furnaces for high-altitude installations.

Thermostat Compatibility

Rheem Thermostat Series Guide

Presents Rheem's 200, 300, 400, and 500 series thermostats and their features.

Limited Warranty Information

General Warranty Terms and Conditions

Explains Rheem's policy for furnishing replacement parts under the limited warranty.

Warranty Coverage Periods

Specifies the duration for Heat Exchanger and Conditional Parts warranties.