HEAT PUMP AND TANK ASSEMBLY
28
17. Position the heat pump module against the tank.
Engage the tab at the bottom of the heat pump module, on the wall side of the module, into the slot
in the tank.
Align the holes in the side of the heat pump module over the three brass studs.
18. Screw the three flange nuts onto the brass studs to connect the wall side of the heat pump module to
the storage tank.
Steps 17 and 18
align heat pump module over studs and screw on flange nuts
19. Engage the tab at the bottom of the heat pump module, on the front side of the module, into the slot in
the tank.
20. Screw in the three fixing bolts to connect the front side of the heat pump module to the storage tank.
Step 20
screw in fixing bolts to connect heat pump module to storage tank
To Next Page
Loading...
