Rheem ASL-JEC 18 Seer User Manual

!
THESE INSTRUCTIONS ARE INTENDED AS AN AID TO
QUALIFIED, LICENSED SERVICE PERSONNEL FOR
PROPER INSTALLATION, ADJUSTMENT AND OPERATION
OF THIS UNIT. READ THESE INSTRUCTIONS THOROUGHLY
BEFORE ATTEMPTING INSTALLATION OR OPERATION.
FAILURE TO FOLLOW THESE INSTRUCTIONS MAY RESULT
IN IMPROPER INSTALLATION, ADJUSTMENT, SERVICE OR
MAINTENANCE POSSIBLY RESULTING IN FIRE, ELECTRICAL
SHOCK, PROPERTY DAMAGE, PERSONAL INJURY OR DEATH.
WARNING
!
92-101691-05-06
SUPERSEDES 92-101691-05-05
AIR-COOLED CONDENSING UNITS
(-)ASL-JEC 18 SEER EQUIPPED WITH THE COMFORT CONTROL
2
SYSTEM™ AND FEATURING DUAL DRIVE COMPRESSORS IN
SELECT MODELS
INSTALLATION INSTRUCTIONS
[ ] INDICATES METRIC CONVERSIONS
ISO 9001:2008
Featuring Industry Standard
R-410A Refrigerant

Rheem ASL-JEC 18 Seer Specifications

General

SEER	18
Refrigerant	R-410A
Operating Voltage	208/230V
Phase	1
Smart Home Compatible	Yes
Cooling Capacity	18000 BTU/h
Stages	Variable

Summary

Safety Information

General Warning Statements

Critical safety advice on installation, operation, and maintenance.

Refrigerant and Electrical Safety Cautions

Safety advisories for handling refrigerants and electrical components.

Locating Unit

Corrosive Environment Considerations

Condenser Location Guidelines

Refrigerant Connections

Tools for R-410A Installation and Servicing

Dual Drive Compressors

Compressor Identification

Comfort Control System Control Identification

Condensing Units Equipped with the Comfort Control² System™™

Control Description

Description of the Comfort Control² Integrated Compressor Control (ICC).

Evacuation Procedure

Comfort Control² System™™ Control Wiring

Comfort Control² System™™ Diagnostic Codes in Dual Drive Condensing Units

Comfort Control² ICC Control Operation

Active Compressor Protection Mode

Test and Fault Recall Modes

ICC Diagnostic Codes

Conventional 24VAC Thermostat Control Wiring