EasyManua.ls Logo

Rheem GG50T06PVT - User Manual

Rheem GG50T06PVT
36 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
AP15765 (05/10)
!
FOR YOUR SAFETY!
Do not store or use gasoline or other flammable
vapors or liquids or other combustible materials in
the vicinity of this or any other appliance. To do
so may result in an explosion or fire.
WHAT TO DO IF YOU SMELL GAS
Do not try to light any appliance.
Do not touch any electrical switch; do not use
any phone in your building.
Immediately call your gas supplier from a
neighbor’s phone. Follow the gas supplier’s
instructions.
If you cannot reach your gas supplier, call
the fire department.
Do not return to your home until authorized
by the gas supplier or fire department.
Improper installation, adjustment, alteration,
service or maintenance can cause property
damage, personal injury, or death . Refer to
this manual. Installation and service must be
performed by a qualified installer, service agency
or the gas supplier.
WARNING: If the information in these instructions is not followed exactly,
a fire or explosion may result causing property damage, personal injury or death.
!
The purpose of this manual is twofold: one, to provide the installer with the basic directions
and recommendations for the proper installation and adjustment of the water heater;
and two, for the owner–operator, to explain the features, operation, safety precautions,
maintenance and troubleshooting of the water heater. This manual also includes a parts
list.
It is very important that all persons who are expected to install, operate or adjust this
water heater read the instructions carefully so they may understand how to perform
these operations. If you do not understand these instructions or any terms within it, seek
professional assistance.
Any questions regarding the operation, maintenance, service or warranty of this water
heater should be directed to the seller from whom it was purchased. If additional
information is required, refer to the section on “If you need service.
Do not destroy this manual. Please read carefully and keep in a safe place for future
reference.
!
Recognize this symbol as an indication of Important Safety Information!
!
California Proposition 65 Warning: This product contains chemicals known to
the State of California to cause cancer, birth defects or other reproductive harm.
Residential 40 and 50 Gallon
Use & Care Manual
With Installation Instructions for the Installer
Printed in USA
D
E
S
I
G
N
C
E
R
T
I
F
I
E
D
®
!
WARNING: This water heater is not
suitable for use in manufactured (mobile) homes!
®
Water Heaters
Gas Residential - FVIR Certified
Manufactured under trademark license by:
Rheem Manufacturing Company
2600 Gunter Park Drive East, Montgomery, AL 36109
El manual en Español está
disponible en www.rheem.com.

Questions and Answers

  • R
    Richard JohnsonJul 29, 2025
    Why is there not enough hot water from my Rheem GG50T06PVT?
    • H
      Hannah WilliamsJul 29, 2025
      Several factors can cause a Rheem Water Heater to not produce enough hot water. It could be due to high water usage exceeding the heater's capacity; wait for the unit to recover after heavy use. Other potential causes include low gas pressure – in that case, check the gas supply and manifold pressure. Also, ensure all hot water faucets are closed tightly to prevent leaks and make sure the “ON/OFF” switch is turned on and the blower is plugged in and receiving 120VAC. Finally, a tripped Combustion Shutoff System could be the cause and requires a qualified service technician.
  • L
    lijefferyAug 2, 2025
    What to do if my Rheem Water Heater water is too hot?
    • C
      Claudia BarberAug 2, 2025
      If the water from your Rheem Water Heater is too hot, the gas control (thermostat) may be set too high. In that case, see the 'Water Temperature Setting' of The Water Heater section of this manual. If that doesn't resolve the issue, the gas control (thermostat) might be defective, requiring a qualified service technician to replace it.
  • T
    timothy79Aug 7, 2025
    What to do if Rheem GG50T06PVT Water Heater main burner does not stay lit?
    • A
      Alexander ZimmermanAug 7, 2025
      If the main burner on your Rheem Water Heater does not stay lit, the combustion shutoff device may have tripped. In this case, the combustion shutoff device should be inspected by a qualified service technician.
  • D
    Dale PatrickAug 11, 2025
    Why is there a yellow flame or soot on my Rheem Water Heater?
    • P
      Pamela MercerAug 11, 2025
      A yellow flame or soot on your Rheem Water Heater can be caused by a few things. Scale on top of the burner may be the reason; in this case, contact a qualified service technician to remove the scale. Another cause could be restricted flue or combustion air inlet openings; remove any obstructions or debris from these openings on the water heater jacket. Insufficient combustion or ventilation air supplied to the water heater location can also cause this issue. Proper operation requires adequate air; refer to the Combustion and Ventilation Air information in the “Installing The Water Heater” section of this manual.
  • M
    Mrs. Deborah Conner DDSAug 14, 2025
    Why is there condensation on my Rheem GG50T06PVT?
    • K
      Karen SalazarAug 14, 2025
      Condensation on your Rheem Water Heater can be normal. It often appears when the water in the tank is warming up and should disappear as the water reaches temperature. However, persistent condensation could indicate a few issues. Check the piping and fittings for possible leaks. Excessive condensation can be normal due to moisture from the products of combustion and will disappear in time, but it can cause main burner outage. Also, the water heater might be undersized for your needs; consider using a larger unit that meets your requirements.
  • J
    Jose McdonaldAug 19, 2025
    Why is my Rheem Water Heater making a rumbling noise?
    • S
      snyderandrewAug 19, 2025
      A rumbling noise in your Rheem Water Heater is typically caused by scale and sediment buildup in the tank. To resolve this, clean the tank.
  • M
    marc97Aug 25, 2025
    What to do if Rheem Water Heater relief valve is producing popping noise or draining?
    • A
      Amy SmithAug 25, 2025
      If the relief valve on your Rheem Water Heater is producing a popping noise or draining, it indicates a pressure buildup caused by thermal expansion in a closed system. This is an unacceptable condition and must be corrected. Contact the water supplier or a plumbing contractor for guidance on how to resolve this. Do not plug the relief valve outlet.

Summary

Safety Instructions

Critical Safety Warnings

Highlights dangers of improper venting, gas leaks, and flammable materials.

Water Temperature Safety

Details risks of scalding from high water temperatures and recommended settings.

LP and Natural Gas Safety

Covers safety precautions specific to liquefied petroleum and natural gas models.

California Installation Requirements

Mandates for earthquake bracing and carbon monoxide detectors in California.

General Safety Precautions

Provides essential safety measures for installation and operation.

Installation Instructions

Water Heater Installation Procedures

Guides on location, clearances, connections, venting, and wiring.

Installation Checklist

A comprehensive checklist for proper water heater installation.

Supplemental Water Heater Applications

Potable and Space Heating Systems

Specific instructions for combination potable and space heating installations.

Lighting the Water Heater

Operating the Water Heater

Operational Safety Precautions

Key safety measures to follow during water heater operation.

Operating Procedure

Step-by-step guide for starting and operating the water heater.

Water Temperature Settings

Guidance on setting the thermostat for safe and efficient water temperature.

Sequence of Operation

Explains the internal sequence of events during heating cycles.

Care and Cleaning of the Water Heater

Draining the Water Heater

Instructions for draining the water heater tank for maintenance or storage.

Routine Preventative Maintenance

Recommended maintenance schedule for long-term reliability.

Housekeeping and Clearances

Maintaining a clean environment and proper clearances around the unit.

Venting System and Burner Inspection

Annual checks for vent system integrity and burner condition.

Vacation and Extended Shut-Down

Procedures for safely shutting down the heater for extended periods.

Anode Rod Maintenance

Importance and procedure for inspecting and replacing the anode rod.

Troubleshooting and Service

Before You Call For Service

Guides users on common problems and initial troubleshooting steps.

Gas Valve LED Error Codes

Interprets diagnostic codes displayed by the gas valve's LED.

Replacement Parts

Ordering Replacement Parts

Information on how to identify and order necessary replacement parts.

Service and Support Information

If You Need Service

Contact information and procedures for obtaining service.

Massachusetts Installation Requirements

Specific installation mandates for Massachusetts, including CO detectors.

Consumer Product Ownership Registration

Rheem GG50T06PVT Specifications

General IconGeneral
Capacity50 gallons
Energy Factor0.62
BTU Input40, 000 BTU/hr
Fuel TypeNatural Gas
Vent TypePower Vent
Warranty6 years
Recovery Rate40 gallons per hour
Ignition SystemElectronic
VentingPVC

Related product manuals