30
7. Remove the 2 sheet metal screws that attached the blower to the bottom of the
blower shelf. (1/4” Socket)
8. Remove the 3 sheet metal screws which attached the blower to the blower shelf
located in the air handler control box. (3/8” Socket)
9. Lower the blower and slide the blower to the left side of the air handler.
10. Remove the 4 motor mount screws from the right side of the blower housing. (3/8”
Socket)
11. Remove the motor assembly from the blower housing by sliding the motor shaft out
of the blower hub.
Remove Screws
Remove 4
Blower Screws
Remove Sheet
Metal Screws
From Each Side
of Blower
To Next Page
Loading...
