To Next PageTo Next Page
Need help?Do you have a question about the Rheem RHLL-HM2417AA and is the answer not in the manual?
General| Model | RHLL-HM2417AA |
|---|---|
| Type | Air Handler |
| Airflow | 1200 CFM |
| Refrigerant | R-410A |
| Voltage | 208/230V |
| Phase | 1 |
| Motor Type | ECM |
| Cooling Capacity | 24000 BTU |
| Depth | 21 inches |
Specifies required clearances to combustible materials for unit installation.
Describes the factory configuration and installation for vertical upflow applications.
Details the conversion process from upflow to vertical downflow installation.
Explains how to convert the unit for horizontal airflow configurations.
Covers requirements for supplying adequate electrical power and branch circuit protection.
Details low voltage control wiring practices and separation from power wiring.
Emphasizes the necessity of permanent grounding for electrical safety.
Detailed electrical data for HSL models with electric heat.
Detailed electrical data for HLL models with electric heat.
Information regarding the use of standard circuit breakers with approved heater kits.
Defines the operating limits for airflow based on cabinet size and cooling/heating.
Airflow data for 240V HSL models with PSC motors across static pressures.
Airflow data for 115/208/480V HSL models with PSC motors.
Airflow data for HLL models with X-13 motors across various voltages and static pressures.
