Rheem RHSL-HM3017JA User Manual

92-20521-32-15
SUPERSEDES 92-20521-32-14
WARNING
▲WARNING
!
These instructions are intended as an aid to qualified licensed
service personnel for proper installation, adjustment and
operation of this unit. Read these instructions thoroughly before
attempting installation or operation. Failure to follow these
instructions may result in improper installation, adjustment,
service or maintenance possibly resulting in fire, electrical
shock, property damage, personal injury or death.
ISO 9001:2008
AIR HANDLERS
FEATURING INDUSTRY STANDARD R-410A REFRIGERANT:
RHLL High Efficiency
RHSL Standard Efficiency
INSTALLATION INSTRUCTIONS
refrigerant

Rheem RHSL-HM3017JA Specifications

General

Brand	Rheem
Model	RHSL-HM3017JA
Category	Air Handlers
Language	English

Summary

1.0 SAFETY INFORMATION

4.0 ELECTRICAL WIRING

4.1 POWER WIRING

Guidelines for connecting the main power supply to the unit.

4.2 CONTROL WIRING

Instructions for connecting low voltage control wiring to the unit.

4.3 GROUNDING

Critical safety instructions for proper grounding of the unit.

4.5 ELECTRICAL DATA – BLOWER MOTOR ONLY – NO ELECTRIC HEAT

4.5A Electrical Data – Blower Motor Only – No Electric Heat: (-)HSL

Electrical specifications for blower motor only, HSL models, no heat.

4.5B Electrical Data – Blower Motor Only – No Electric Heat: (-)HLL

Electrical specifications for blower motor only, HLL models, no heat.

4.6 ELECTRICAL DATA – WITH ELECTRIC HEAT

4.6A ELECTRICAL DATA – WITH ELECTRIC HEAT: (-)HSL

Electrical data for HSL models with electric heat kits installed.

4.6B ELECTRICAL DATA – WITH ELECTRIC HEAT: (-)HLL

Electrical data for HLL models with electric heat kits installed.

4.6C HEATER KIT SUPPLEMENTAL INFORMATION

Information on using standard circuit breakers with approved heater kits.

5.0 AIRFLOW PERFORMANCE

5.1 AIRFLOW OPERATING LIMITS

Operating limits for airflow based on cabinet size and conditions.

5.2 240V AIRFLOW PERFORMANCE DATA – (-)HSL (PSC MOTOR)

Airflow performance data for 240V HSL models with PSC motors.

5.3 115/208/480V AIRFLOW PERFORMANCE DATA – (-)HSL (PSC MOTOR)

Airflow performance data for 115/208/480V HSL models with PSC motors.

5.4 115/208/240/480V AIRFLOW PERFORMANCE DATA – (-)HLL (X-13 MOTOR)

Airflow performance data for 115/208/240/480V HLL models with X-13 motors.

9.0 SEQUENCE OF OPERATION

9.1 COOLING (COOLING ONLY OR HEAT PUMP)

Operation sequence for cooling mode with electric heat or heat pump.

9.2 HEATING (ELECTRIC HEAT ONLY)

Operation sequence for electric heat-only heating mode.

9.3 HEATING (HEAT PUMP)

Operation sequence for heat pump heating mode with supplemental heat.

9.6 EMERGENCY HEAT (HEATING HEAT PUMP)

11.0 PRE-START CHECKLIST

12.0 MAINTENANCE

12.5 BLOWER ASSEMBLY REMOVAL AND REPLACEMENT

12.6 MOTOR REPLACEMENT

12.7 BLOWER WHEEL REPLACEMENT