Need help?Do you have a question about the Rheem RKNL 13 Seer Series and is the answer not in the manual?
General| Brand | Rheem |
|---|---|
| Model | RKNL 13 Seer Series |
| Category | Air Conditioner |
| Language | English |
Provides guidelines for installing the unit on an outdoor slab, emphasizing level placement and drainage.
Details the procedure for attaching the exhaust and combustion air inlet hoods, which are shipped separately.
Specifies the minimum clearances required around the unit for proper performance and serviceability.
Outlines considerations for rooftop installation, including structural support and access for servicing.
Provides guidance on fabricating and sizing ductwork according to local codes and industry standards.
Covers requirements for return air ductwork, emphasizing sealing and preventing combustion product entry.
Details the proper methods and codes for connecting the gas supply to the unit.
Provides instructions and warnings for converting the unit from natural gas to LP gas.
Explains how to adjust and verify the furnace input rate, including considerations for altitude.
Details the condensate drain connection and the importance of installing a trap.
Covers requirements for the main electrical power supply, including disconnects and voltage checks.
Refers to diagrams for wiring the unit and external devices.
Directs the user to a troubleshooting chart for diagnosing issues.
System charge chart for 3-ton units using R-410A refrigerant, showing pressures vs. ambient temperature.
System charge chart for 3.5-ton units using R-410A refrigerant, showing pressures vs. ambient temperature.
System charge chart for 4-ton units using R-410A refrigerant, showing pressures vs. ambient temperature.
System charge chart for 5-ton, 13 SEER units using R-410A refrigerant, showing pressures vs. ambient temperature.
System charge chart for 5-ton, 14 SEER units using R-410A refrigerant, showing pressures vs. ambient temperature.
To Next Page
