To Next PageTo Next Page
Need help?Do you have a question about the Rheem RP1418AJ1NA and is the answer not in the manual?
General| Brand | Rheem |
|---|---|
| Model Number | RP1418AJ1NA |
| Type | Heat Pump |
| Tonnage | 1.5 Ton |
| SEER Rating | 14 |
| HSPF Rating | 8.2 |
| Voltage | 208/230V |
| Phase | 1 |
| Refrigerant Type | R-410A |
| Unit Weight (lbs) | 150 |
| Compressor Type | Scroll |
| Cooling Capacity (BTU/h) | 18000 BTU/h |
| Heating Capacity (BTU/h) | 18000 BTU/h |
Details critical safety warnings and cautions for proper unit installation and operation.
Provides detailed electrical and physical specifications for RP13, RP14, and RP15 models.
Guidelines for selecting an optimal installation site, considering clearances and environmental factors.
Lists necessary tools, manifold sets, hoses, and recovery cylinders for R-410A systems.
Details R-410A refrigerant properties, pressure differences from R-22, and combustibility concerns.
Specifies practices for installing interconnection tubing, including sizing and refrigerant level adjustment.
Best practices for installing tubing, making connections, and performing leak tests.
Covers line-voltage power connections, conduit requirements, and essential grounding procedures.
Outlines the critical process of evacuating the system to remove air and moisture, followed by leak detection.
Guides on verifying and adjusting refrigerant charge using weight, pressures, and subcooling methods.
Flowcharts for diagnosing mechanical issues in cooling, heating, and defrost modes.
Charts for identifying symptoms, causes, remedies, and analyzing specific issues like compressor overheating.
Quick reference tables for diagnosing system problems in cooling and heating modes based on indicators.
