Rheem RP1560AJ1NA User Manual

R-410A HEAT PUMP
OUTDOOR UNITS
92-105074-04-00 (1/15)
Printed in USA
[ ] indicates metric conversions.
Do not destroy this manual.
Please read carefully and
keep in a safe place for future
reference by a serviceman.
WARNING
THESE INSTRUCTIONS
ARE INTENDED AS AN AID
TO QUALIFIED, LICENSED
SERVICE PERSONNEL FOR
PROPER INSTALLATION,
ADJUSTMENT, AND
OPERATION OF THIS UNIT.
READ THESE INSTRUCTIONS
THOROUGHLY BEFORE
ATTEMPTING INSTALLATION
OR OPERATION. FAILURE
TO FOLLOW THESE
INSTRUCTIONS MAY RESULT
IN IMPROPER INSTALLATION,
ADJUSTMENT, SERVICE,
OR MAINTENANCE
POSSIBLY RESULTING IN
FIRE, ELECTRICAL SHOCK,
PROPERTY DAMAGE,
PERSONAL INJURY, OR
DEATH.
INSTALLATION INSTRUCTIONS
RP13 (13 SEER)
RP14 (14 SEER) AND RP15 (15 SEER)
WARNING:
RECOGNIZE THIS SYMBOL
AS AN INDICATION OF
IMPORTANT SAFETY
INFORMATION
ST-A1226-01-00

Rheem RP1560AJ1NA Specifications

General

Brand	Rheem
Model	RP1560AJ1NA
Category	Heat Pump
Language	English

Summary

IMPORTANT SAFETY INFORMATION

Safety Warnings and Precautions

Essential safety guidelines to prevent injury, death, or property damage during installation and operation.

GENERAL INFORMATION

Product Overview and Application Guidelines

INSTALLATION - Choosing a Location

Location Selection Criteria and Environmental Factors

Guidance on selecting an optimal outdoor unit location, considering operational issues and corrosive environments.

INSTALLATION - Mounting and Securing

Unit Mounting, Elevation, and Securing Methods

INSTALLATION - Tools and Refrigerant

R-410A Tools, Specifications, and Handling

Required tools, R-410A refrigerant properties, safety precautions, and quick reference guide.

INSTALLATION - Tubing and Linesets

Replacement Units, Indoor Coils, and Tubing

INSTALLATION - Tubing Connections and Leak Testing

Tubing Connections and Leak Testing

WIRING - Control Wiring

Control Wiring Diagrams and Considerations

Typical wiring diagrams for thermostats, air handlers, and control circuits.

WIRING - Power and Grounding

Power Wiring and Grounding

START-UP - Initial Procedures

Initial Start-Up and Airflow Checks

Steps for initial start-up after extended shutdown and checking system airflow.

START-UP - Evacuation and Leak Testing

System Evacuation and Leak Testing

Procedures for evacuating the system to remove moisture and air, followed by leak testing.

START-UP - Refrigerant Charging

Refrigerant Charge Verification and Weight Charging

Methods for checking and adjusting refrigerant charge using weight and system data.

START-UP - Refrigerant Charge Adjustment

Gross and Final Refrigerant Charge Adjustment

Detailed steps for performing gross and final refrigerant charge adjustments using pressure and subcooling.

COMPONENTS AND CONTROLS - Compressor Features

Compressor Controls and Features

COMPONENTS AND CONTROLS - Defrost Control

Demand Defrost Control Operation and Testing

Explains the demand defrost control, test mode, troubleshooting, and pressure monitoring.

DIAGNOSTICS - Mechanical Checks

Cooling Mechanical Checks Flowchart

DIAGNOSTICS - Heating and Defrost Checks

Heating and Defrost Mechanical Checks

DIAGNOSTICS - General Troubleshooting

General Troubleshooting Chart

DIAGNOSTICS - Troubleshooting Tips

Cooling and Heating Mode Troubleshooting Tips

WIRING DIAGRAMS - Single Phase

Single Phase Wiring Diagrams

WIRING DIAGRAMS - Three Phase

Three Phase Wiring Diagrams

WIRING DIAGRAMS - Higher Voltage Three Phase

High Voltage Three Phase Wiring Diagrams