Rheem RP1730HJVXA User Manual

Rheem Classic Plus
®
Series
Side Discharge Heat Pump
FORM NO. P11-821 REV. 1
RP17**H Series
Efficiency: 19 SEER/12 EER/10.7 HSPF
Nominal Sizes 2, 2.5, 3 & 4 Ton
[7.03, 8.8, 10.6 & 14.06 kW]
Cooling Capacities 24 to 45.6 kBTU
[7.03 to 13.36 kW]
• Variable speed inverter-driven compressor for maximum
comfort and energy savings. Provides heating down to -5ºF
• Outdoor sound levels as low as 53 dBA - quiet operation for
areas with noise constraints
• Space saving single fan outdoor unit
• High efficiency DC motor
• Communicating heat pump with multi-position air handler
• Compact size - ideal for areas with tight space constraints
Air
Heat Pumps
RP17**H Series
18.5

Rheem RP1730HJVXA Specifications

General

Brand	Rheem
Model	RP1730HJVXA
Category	Air Conditioner
Language	English

Summary

Noise Level Curves

Noise Level Curves (Continued)

Installation Space Requirements (RP1724/1730HJVXA)

Obstruction in Upper Space

Details clearance requirements when there are obstructions above the outdoor unit.

Installation Space Requirements (RP1724/1730HJVXA) (Continued)

Obstruction in Upper Space (Multiple Units)

Installation Space Requirements (RP1736/1748HJVXA)

Cautions for Installation Space

Installation Space Requirements (RP1736/1748HJVXA) (Continued)

Single Outdoor Unit Installation

Specifies clearance requirements for single outdoor unit installations with various obstructions.

Multiple Outdoor Unit Installation

Details clearance requirements for multiple outdoor units installed side-by-side.

Outdoor Unit Installation in Multi-Row

Wiring Diagrams (RP1724/1730HJVXA)

Wiring Diagrams (RP1736/1748HJVXA)

Refrigerant Circuit Information (RP1724/1730HJVXA)

Refrigerant Circuit Information (RP1736/1748HJVXA)

Refrigerant Charge Calculation

Capacity Compensation (Pipe Length and Height Difference)

Capacity Compensation (Continued)

Safety Devices and Protections

Circuit, Fan Motor, and Compressor Protections

Details safety devices for circuit, fan motor, and compressor protection across different models.

High Pressure Protection

Outlines the high pressure protection mechanisms and their activation/reset parameters.

Function Settings and Operation Board

Setting Methods and Warnings

Outdoor Unit Control Board Layout

Function Settings and Operation Board (Continued)

LED Display and DIP Switch Part

LED Display and Switch Function Description

Test Run Procedures

Test Run Precautions

Important cautions before and during the test run operation to protect the compressor and ensure safety.

Test Run Method

Step-by-step instructions for performing the test run, including switch operations and mode selection.

Error Code Display and Interpretation

Error Location Display

How LEDs indicate the location of an error on the control board.

Error Code Interpretation

How to interpret error codes based on LED blinking patterns and display modes.

Error Code List

Detailed Error Codes and Types

A comprehensive list of error codes, their corresponding error types, and related information.

Pump Down Operation Procedure

Pump Down Precautions

Pump Down Steps