EasyManua.ls Logo

Rheem RP18AZ48AJVCA - User Manual

Rheem RP18AZ48AJVCA
48 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
VARIABLE SPEED R-410A
HEAT PUMP/AIR CONDITIONER
OUTDOOR UNITS
92-104921-27-01 ( / )
Printed in USA
[ ] indicates metric conversions.
Do not destroy this manual.
Please read carefully and
keep in a safe place for future
reference by a serviceman.
WARNING
THESE INSTRUCTIONS
ARE INTENDED AS AN AID
TO QUALIFIED, LICENSED
SERVICE PERSONNEL FOR
PROPER INSTALLATION,
ADJUSTMENT, AND
OPERATION OF THIS UNIT.
READ THESE INSTRUCTIONS
THOROUGHLY BEFORE
ATTEMPTING INSTALLATION
OR OPERATION. FAILURE
TO FOLLOW THESE
INSTRUCTIONS MAY
RESULT IN IMPROPER
INSTALLATION,
ADJUSTMENT, SERVICE,
OR MAINTENANCE
POSSIBLY RESULTING IN
FIRE, ELECTRICAL SHOCK,
PROPERTY DAMAGE,
PERSONAL INJURY, OR
DEATH.
(-)A18AZ & (-)P18AZ (18 SEER2)
EQUIPPED WITH ECONET™
COMMUNICATIONS
WARNING:
RECOGNIZE THIS SYMBOL
AS AN INDICATION OF
IMPORTANT SAFETY
INFORMATION
ISO 9001:2015
Enabled
INSTALLATION INSTRUCTIONS

Table of Contents

Question and Answer IconNeed help?

Do you have a question about the Rheem RP18AZ48AJVCA and is the answer not in the manual?

Rheem RP18AZ48AJVCA Specifications

General IconGeneral
BrandRheem
ModelRP18AZ48AJVCA
TypeAir Conditioner
Voltage208/230V
Phase1
Frequency60 Hz
RefrigerantR-410A
Compressor TypeScroll
Cooling Capacity48, 000 BTU
Stages2
Warranty10 years

Summary

IMPORTANT SAFETY INFORMATION

Warnings and Cautions

Crucial safety warnings and operational cautions for installation and use.

INSTALLATION

Tools, Refrigerant, and R-410 A Guide

Lists essential tools, R-410A specs, and quick reference guide.

Refrigerant Line Set Selection

Guidelines for choosing the correct refrigerant line set size.

SYSTEM START-UP & REFRIGERANT CHARGING

Indoor Air-Flow Verification and Refrigerant Charging

Verifying air-flow and performing refrigerant charge.

Charging Measurement and Preliminary Adjustments

Setting up measurement devices and making preliminary charge adjustments.

Final Charging and Installation Completion

Final charge adjustment and completion of installation.

ACTIVE SYSTEM PROTECTION FEATURES

Basic Protection Features

Minimum run timer, oil return, discharge temperature, and pressure protections.

Advanced Protection and Fault Handling

Overcurrent, voltage, communication, sensor failure, and lock-out modes.

DIAGNOSTICS & TROUBLESHOOTING

Sensor and Transducer Checks

How to test system sensors and transducers for proper function.

General Troubleshooting Guide

A guide to diagnosing and resolving common system issues.

Service Analyzer Charts

Charts for analyzing system performance and identifying problems.

Troubleshooting Tips

Practical tips for troubleshooting cooling and heating modes.

WIRING DIAGRAM

Related product manuals