Do you have a question about the Rheem RRNL and is the answer not in the manual?
Refrigerant | R-410A |
---|---|
Phase | 1 |
Dimensions (Indoor Unit) | Varies by model |
Dimensions (Outdoor Unit) | Varies by model |
Weight (Indoor Unit) | Varies by model |
Weight (Outdoor Unit) | Varies by model |
Type | Mini-Split Air Conditioner |
Cooling Capacity | 9, 000 - 36, 000 BTU |
HSPF Rating | Up to 10.0 |
Compressor Type | Inverter |
Operating Voltage | 208/230V |
Essential safety warnings regarding fiberglass, chemicals, installation, and combustible materials.
Detailed instructions for connecting the gas supply line, including piping codes and shut-off valve requirements.
Safety warning and general instructions for connecting the unit's power supply.
Provides instructions on how to start and shut down the furnace safely, including warnings.
System charge chart for 2 Ton cooling (RRNL/RPL) using R-410A refrigerant.
System charge chart for 2 1/2 Ton cooling (RRNL/RPL) with R-410A refrigerant.
System charge chart for 3 Ton cooling (RRNL/RPL) with R-410A refrigerant.
System charge chart for 3 1/2 Ton cooling (RRNL/RPL) with R-410A refrigerant.
System charge chart for 4 Ton cooling (RRNL/RPL) with R-410A refrigerant.
System charge chart for 5 Ton cooling (RRNL) with R-410A refrigerant.
1st (Low) Stage charge chart for 5 Ton cooling (RPL) with R-410A refrigerant.
2nd (High) Stage charge chart for 5 Ton cooling (RPL) with R-410A refrigerant.
1st (Low) Stage charge chart for 2 Ton cooling (RRRL) with R-410A refrigerant.
2nd (High) Stage charge chart for 2 Ton cooling (RRRL) with R-410A refrigerant.
1st (Low) Stage charge chart for 3 Ton cooling (RRRL) with R-410A refrigerant.
2nd (High) Stage charge chart for 3 Ton cooling (RRRL) with R-410A refrigerant.
1st (Low) Stage charge chart for 4 Ton cooling (RRRL) with R-410A refrigerant.
2nd (High) Stage charge chart for 4 Ton cooling (RRRL) with R-410A refrigerant.
A detailed chart for troubleshooting cooling system problems, listing symptoms, causes, and remedies.